1 thermistor input with measurement range -40 to +70°C. 'D' Indicates LCD display.
GC04
Thermistor input with measurement range -50 to +150°C. 'D' Indicates LCD display. Last digit indicates number of inputs.
With visual alarm. High and low alarm levels, together with alarm delay time, can be set using Eltek Darca Software. 'S' indicates visual and audible alarm.
The GenII M series retains the standard GenII transmitter specification and adds 12,000 readings of built-in backup memory. The memory is used in continuous overwrite mode. This means many weeks of data can be held in the transmitter, depending on the number of channels in use.
GD31
Connectors are included. If you require sensors, please order them separately.
This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.
The following products are supported:
WBG
| RF specification: | EN300-220 | |
| RF power: | 10mW | |
| Environment specification | ||
| Compliant to EN300-220: | -10 to +55°C | |
| Actual: | -30 to +65°C | |
| Humidity: | 100% non condensing | |
| Environmental rating: | IP40 | |
| Dimensions (footprint): | 78 x 41mm | |
| Transmission interval range: | 1 sec to 4 hours | |
| Indicator (red LED): | transmit active/on/off | |
| Control switch (concealed): | test mode / hibernate | |
| Antenna socket: | SMA | |
| Model(s) | Sensors | Range | Resolution | Accuracy * |
|---|---|---|---|---|
| GC04/GD04 | 1 x external thermistor | -40 to +70°C | 0.1°C | ±0.2°C (-15 to +40°C) |
| 0.2°C | ±0.4°C (-29 to +65°C) | |||
| 0.3°C | ±0.6°C (-36 to +70°C) | |||
| 0.4°C | ±0.8°C (-40 to -36°C) | |||
| GS31/GD31 | 1 x external thermistor | -50 to 150°C | 0.05°C (-5 to +75°C) | ±0.1°C (-5 to +75°C) |
| 0.1°C (-25 to +100°C) | ±0.2°C (-25 to +100°C) | |||
| 0.2°C (-40 to +125°C) | ±0.4°C (-40 to +125°C) | |||
| GS32/GD32 | 2 x external thermistor | As GS31 | ||
| GS34/GD34 | 4 x external thermistor / state inputs | As GS31 | ||
| GS38/GD38 | 8 x external thermistor / state inputs | As GS31 | ||
| GD32AL/GD34AL | As GD32 and GD34 with audible and visual alert |
|||
Gen II Quick Start Instructions
ELCC (a sensor for detecting the failure of AC mains supply)
GenII M Series transmitters with backup memory
