13E and 14E Series

GC13E / GD13E

Wired socket for 1 x RHT20E RH/T probe. This high specification RH and temperature probe can be placed precisely where needed.

'C' indicates standard case without display.

'D' indicates display.

GDM13E - with backup memory

The GenII M series retains the standard GenII transmitter specification and adds 12,000 readings of built-in backup memory. The memory is used in continuous overwrite mode. This means many weeks of data can be held in the transmitter, depending on the number of channels in use.

GD14E - with additional thermistor inputs

Wired socket for 1 x RHT20E RH/T probe and 2 x thermistor temperature probes (-40 to +70°C) with display.

LM14E Logmitter

The GenII Logmitter is a series of devices from Eltek that can be configured as a GenII transmitter or standalone datalogger.

Configured as a logger and deployed alone, it is ideal for smaller spaces and short term or temporary events in sites such as galleries or laboratories. For large buildings, e.g. city block museums, storage areas or research laboratories, it can be deployed as a transmitter alongside other GenII transmitters.

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

• All GD, GC, GL and GS series transmitters
• RP250GD repeater and RC250 receiver