Need to know energy usage in, for instance, a domestic situation? Eltek GenII pulse transmitters and Rayleigh or Elster sub-meter systems provide a precise answer.
2 x pulse inputs (200Hz). Includes external DC supply input.
7 x pulse inputs (15Hz). Includes external DC supply input. With display.
8 x pulse inputs (15Hz). Battery powered only. With display.
These transmitters are supplied with 4 x LR6 AA alkaline batteries installed to provide 2 years operation if logging interval > 5 minutes. For logging intervals less than 5 mins an external DC supply (12VDC at 50mA) may be required (Transmitter types GC62 and GD67 only).
GC62
Rayleigh PRO1TE
| Sensor | Current rating | Output | Max load |
|---|---|---|---|
| Rayleigh PRO1TE / PRO1D | 0-45A | 1 pulse per 0.5Wh | 11.25kW |
| Rayleigh conto D2 | 5-63A | 1 pulse per Wh | 15.75kW |
| Rayleigh PRO75D-P | 10-100A | 1600 pulses per kWh | 25kW |
| Elster AC100C | 10-100A | 1 pulse per 10Wh |
This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.
The following products are supported:
WBG
| Model(s) | Sensors and range |
|---|---|
| GC62 | 2 x pulse inputs (200Hz) with external DC supply input |
| GD67 | 7 x pulse inputs (15Hz) with external DC supply input |
| GD68 | 8 x pulse inputs (15Hz) |
| RF specification: | EN300-220 | |
| RF power: | 10mW | |
| Environment specification | ||
| Compliant to EN300-220: | -10 to +55°C | |
| Actual: | -30 to +65°C | |
| Humidity: | 100% non condensing | |
| Environmental rating: | IP40 | |
| Dimensions (footprint): | 78 x 41mm | |
| Transmission interval range: | 1 sec to 4 hours | |
| Indicator (red LED): | transmit active/on/off | |
| Control switch (concealed): | test mode / hibernate | |
| Antenna socket: | SMA | |
Gen II Quick Start Instructions
