Built-in digital RH and temperature sensor.
The transmitter retains all of the GenII transmitter hallmarks whilst adding in logging capabilities, with storage for approximately 52,000 readings.
The GDLM10 can be used for monitoring objects in transit, for example museum exhibits. The unit is removed from its normal location, transported with the object, and upon reaching its destination, the readings can be downloaded and optionally added into a database, for continuous monitoring.
The GDLM10 can also be used as a standalone environmental monitoring solution, with data being downloaded from the unit for analysis.
We offer a range of software compatible with the unit, depending on the user requirements.
'D' indicates display.
'W' indicates white finish.
GDLM10
This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.
The following products are supported:
WBG
| Model(s) | Sensors | Range | Resolution | Accuracy |
|---|---|---|---|---|
| GDLM10 | built-in temperature | -30 to 65°C | 0.1°C | ±0.4°C (+5 to +40°C) |
| ±1.0°C (-20 to +65°C) | ||||
| ±1.5°C (-30 to -20°C) | ||||
| built-in RH | 0-100% | 0.1% | ±2% (10 to 90%RH) | |
| ±4% (0 to 100%RH) |
| RF specification: | EN300-220 | |
| RF power: | 10mW | |
| Environment specification | ||
| Compliant to EN300-220: | -10 to +55°C | |
| Actual: | -30 to +65°C | |
| Humidity: | 100% non condensing | |
| Environmental rating: | IP40 | |
| Dimensions (footprint): | 78 x 41mm | |
| Transmission interval range: | 1 sec to 4 hours | |
| Indicator (red LED): | transmit active/on/off | |
| Control switch (concealed): | test mode / hibernate | |
| Antenna socket: | SMA | |
