Transmitters for monitoring pulse output sensors

62 and 67/68 Series


2 x pulse inputs (voltage-free or digital: 250Hz max).


7 x pulse inputs (voltage-free or digital: 15Hz max) with external power connection. With display.


8 x pulse inputs (voltage-free or digital: 15Hz max). With display.




If you require sensors, please order them from Eltek separately.

Flownetix 315 water flow meter

For measuring water flow using the GC62 transmitter.

Range 0-45A (1 pulse per 0.5wh).

Flownetix 315

Flownetix 315


WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

  • All GD, GC, GL and GS series transmitters
  • RP250GD repeater and RC250 receiver


Common GenII Transmitter Specification

RF specification: EN300-220
RF power: 10mW
Environment specification  
  Compliant to EN300-220: -10 to +55°C
  Actual: -30 to +65°C
  Humidity: 100% non condensing
Environmental rating: IP40
Dimensions (footprint): 78 x 41mm
Transmission interval range: 1 sec to 4 hours
Indicator (red LED): transmit active/on/off
Control switch (concealed): test mode / hibernate
Antenna socket: SMA


Common to all transmitters

Gen II Quick Start Instructions

Specific to this family of transmitters


Energy monitoring with pulse transmitters

User Instructions:

User Instructions For GC62
User Instructions For GC67/8