Transmitters for monitoring outdoor RH and temperature

These products consist of an IP65 rated polycarbonate enclosure with self powered transmitter, Stevenson screen and RH/temperature probe. The OD14E and OD43E both provide additional thermistor temperature inputs and the OD43E also provides an input for a pyranometer.

The enclosure is provided with 4 fixing holes that are obscured when the cover is fitted.

OD04

The OD04 is an IP65 rated polycarbonate enclosure with self powered GD04 transmitter and thermistor temperature probe. The enclosure is provided with 4 fixing holes that are obscured when the cover is fitted.

OD04

OD04

OD13E

The OD13E is an IP65 rated polycarbonate enclosure with a self-powered GD13Ecf transmitter.

  • Stevenson screen
  • RHT10E RH/T probe
  • GD13Ecf (with display) - "cf" suffix denotes that the transmitter is conformally coated.
OD13J

OD13E

OD14E

The OD14E is equipped with transmitter type GD14Ecf to provide an RH/temperature probe and additionally 2 thermistor temperature inputs.

Wall mounting IP65 case with:
  • Stevenson screen
  • RHT10E RH/T probe
  • 2 x temperature inputs
  • Compression gland
  • GD14Ecf (with display) - "cf" suffix denotes that the transmitter is conformally coated.

OD43E

Wall mounting IP65 case with:
  • Stevenson screen
  • RHT10E RH/T probe
  • GD43EScf transmitter (with display). Transmitter conformally coated with extended battery pack and inputs for pyranometer (0-30mV) and external temperature sensor.
OD43E

OD43E

Sensors

If you require sensors, please order them separately.

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

  • All GD, GC, GL and GS series transmitters
  • RP250GD repeater and RC250 receiver

WBG

Transmitter Specification

Model(s) Sensors Range Resolution Accuracy
GD04 1 x external thermistor temperature -40 to +70°C 0.1°C
0.2°C
0.3°C
0.4°C
±0.2°C (-15 to +40°C)
±0.4°C (-29 to +65°C)
±0.6°C (-36 to +70°C)
±0.8°C (-40 to -36°C)
GD13Ecf external RH (EplusE EE68)

external temperature (part EplusE EE68)
0-100%

-40 to 80°C
  ± 2% (10 to 90%RH)
± 3% (0 to 100%RH)
0.6°C (0 to+40°C)
1.0°C (-40 to +80°C)
GD14Ecf external RH (part EplusE EE68)
external temperature (part EplusE EE68)
2 x external thermistor temperature
As GD13E
As GD13E
-40 to +70°C


0.1°C
0.2°C
0.3°C
0.4°C


±0.2°C (-15 to +40°C)
±0.4°C (-29 to +65°C)
±0.6°C (-36 to +70°C)
±0.8°C (-40 to -36°C)
GD43EScf 1 x external RH and temperature 
1 x voltage / current for pyranometer
1 x external thermistor temperature
as GD13Ecf
0-30mV
-50 to 150°C

0.1%
0.05°C
0.1°C
0.2°C

±30uV
±0.1°C (-5 to +75°C)
±0.2°C (-25 to +100°C)
±0.4°C (-40 to +125°C)

IP65 case

Dimensions (including screen): Width:120mm x Height:335mm x Depth:85mm

Common GenII Transmitter Specification

RF specification: EN300-220
RF power: 10mW
Environment specification  
  Compliant to EN300-220: -10 to +55°C
  Actual: -30 to +65°C
  Humidity: 100% non condensing
Environmental rating: IP40
Dimensions (footprint): 78 x 41mm
Transmission interval range: 1 sec to 4 hours
Indicator (red LED): transmit active/on/off
Control switch (concealed): test mode / hibernate
Antenna socket: SMA

Documentation

Common to all transmitters

Gen II Quick Start Instructions

Specific to this family of transmitters

Datasheets

OD13E and OD14E Datasheet