Light, UV and temperature transmitters

GenII light transmitters are designed for users who need to monitor temperature, humidity and visible light or visible and ultra violet light. All transmitters utilise the museum and conservation industry preferred Elsec – Littlemore light / light and UV sensors. The transmitters interface with all sensors at digital level so that no system accuracy is lost. When used with Darca Heritage software, both instantaneous and cumulative light and UV values can be provided.

CB70

CB70

Flexible mounting options make the CB70 transmitter ideal for wall mounting or for locating inside a display cabinet with full pan and tilt adjustment. Other case colour options are available.

This transmitter has an external configuration socket.

GL70 / GL70W

GL70
GL70W

Light transmitter in a standard brushed aluminium or white case. With built-in Littlemore Scientific light sensor (Visible and UV), RH and temperature.

GD72E

GD72E

GD72E with LS50

GD72E

GD72E with LS70

As all sensors are on leads, the combination is ideal for all environments and in particular display cases, so that only the light sensor and tip (top 10mm) of the RHT10E probe need be visible.

The LS50 ('Light puck') and LS70 modules utilise the museum and conservation industry preferred Elsec - Littlemore light / light and UV sensors. The GD72E transmitter interfaces with all sensors at digital level so that no system accuracy is lost. When used with Darca Heritage software both instantaneous and cumulative light and UV values can be provided

The LS50 light only module, LS70 light/UV module, and the RHT10E must be ordered separately.

Sensors - order separately

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

  • All GD, GC, GL and GS series transmitters
  • RP250GD repeater and RC250 receiver

WBG

Transmitter Specification

Model(s) Sensors Range Resolution Accuracy
CB70 / GL70 / GL70W / GD72E built-in temperature


built-in RH
-30 to 65°C


0-100%
0.1°C


0.1%
±0.4°C (+5 to +40°C)
±1.0°C (-20 to +65°C)
±1.5°C (-30°C)
±2% (10 to 90%RH)
±4% (0 to 100%RH)
1 x visible light 0-4,000 Lux
0-200 KLux
0.1Lux
0.01KLux
1 x UV light 0-5000 mW/m²
0-10,000 µW/Lumen

LS50 light puck

Dimensions: 33mm diameter x 8 mm height
Lead length: 2m

LS70

Dimensions: 73 x 50 x 30mm.
Lead length: 2m

Common GenII Transmitter Specification

RF specification: EN300-220
RF power: 10mW
Environment specification  
  Compliant to EN300-220: -10 to +55°C
  Actual: -30 to +65°C
  Humidity: 100% non condensing
Environmental rating: IP40
Dimensions (footprint): 78 x 41mm
Transmission interval range: 1 sec to 4 hours
Indicator (red LED): transmit active/on/off
Control switch (concealed): test mode / hibernate
Antenna socket: SMA

Documentation

Common to all transmitters

Gen II Quick Start Instructions

Specific to this family of transmitters

GD72E transmitter datasheet
CB70 transmitter datasheet