Transmitters with built-in temperature / RH and temperature sensors

00 Series

GC06 / GD06

1 built-in thermistor temperature with measurement range -40 to +70°C. 'D' Indicates LCD display.

GC04

GC06

EC05 with discreet case

The EC series is designed to meet the need for a discreet transmitter for domestic and public buildings placement. It features reduced weight without compromising transmitter performance or measurement accuracy. The EC series lends itself perfectly for monitoring individual or groups of houses and for control of an environment when linked to a BMS, as is required in historic houses or public buildings.

  • Built-in digital temperature sensor
  • Unobtrusive appearance
  • Wall mounting
  • Can be used for data logging and environmental control simultaneously.
EC06

EC05

10 Series

GC10 / GD10 / GC10W / GD10W

Built-in digital RH and temperature sensor.

'C' indicates standard case without display.

'D' indicates display.

'W' indicates white finish.

GDM10 with backup memory

The GenII M series retains the standard GenII transmitter specification and adds 12,000 readings of built-in backup memory. The memory is used in continuous overwrite mode. This means many weeks of data can be held in the transmitter, depending on the number of channels in use.

LM10 Logmitter

The GenII Logmitter is a series of devices from Eltek that can be configured as a GenII transmitter or standalone datalogger.

Configured as a logger and deployed alone, it is ideal for smaller spaces and short term or temporary events in sites such as galleries or laboratories. For large buildings, e.g. city block museums, storage areas or research laboratories, it can be deployed as a transmitter alongside other GenII transmitters.

GD10

EC10 with discreet case

The EC series is designed to meet the need for a discreet transmitter for domestic and public buildings placement. It features reduced weight without compromising transmitter performance or measurement accuracy. The EC series lends itself perfectly for monitoring individual or groups of houses and for control of an environment when linked to a BMS, as is required in historic houses or public buildings.

  • Sensor is the same as GC10
  • Unobtrusive appearance
  • Wall mounting
  • Can be used for data logging and environmental control simultaneously.
EC10

EC10

11 Series

GD11

Built-in digital RH and temperature sensor & external thermistor input. With display.*

GD11

* (Tini QG connector not included, order separately. Specify connector Code 4when ordering probe)

Accessories

WBG Wall bracket docking kit

This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.

The following products are supported:

  • All GD, GC, GL and GS series transmitters
  • RP250GD repeater and RC250 receiver

WBG

Transmitter Specification

Model(s) Sensors Range Resolution Accuracy
EC05 built-in digital temperature -30 to +65°C 0.1°C ±0.5°C (-10 to +65°C)
GC06/GD06 built-in thermistor -40 to +70°C 0.1°C ±0.2°C (-15 to +40°C)
0.2°C ±0.4°C (-29 to +65°C)
0.3°C ±0.6°C (-36 to +70°C)
0.4°C ±0.8°C (-40 to -36°C)
GC10/GD10 built-in temperature -30 to 65°C 0.1°C ±0.4°C (+5 to +40°C)
±1.0°C (-20 to +65°C)
±1.5°C (-30 to -20°C)
built-in RH 0-100% 0.1% ±2% (10 to 90%RH)
±4% (0 to 100%RH)
GD11 built-in temperature and RH As GC10
external thermistor temperature -15 to 40°C 0.1°C ±0.3°C
-30 to 65°C 0.2°C ±0.5°C

Common GenII Transmitter Specification

RF specification: EN300-220
RF power: 10mW
Environment specification  
  Compliant to EN300-220: -10 to +55°C
  Actual: -30 to +65°C
  Humidity: 100% non condensing
Environmental rating: IP40
Dimensions (footprint): 78 x 41mm
Transmission interval range: 1 sec to 4 hours
Indicator (red LED): transmit active/on/off
Control switch (concealed): test mode / hibernate
Antenna socket: SMA

Documentation

Common to all transmitters

Gen II Quick Start Instructions

Specific to this family of transmitters

Datasheets

GenII M Series transmitters with backup memory
GenII Logmitter