banner
Home > Product library > Telemetry > Transmitters > Built-in temperature and RH sensors

Transmitters with built-in digital RH and temperature sensors

GC10
Built-in digital RH and temperature sensor.
 
GC10W Built-in digital RH and temperature sensor. White finish.  
GD10
Built-in digital RH and temperature sensor. With display.
GD10W Built-in digital RH and temperature sensor. With display. White finish. GD10W
GD11
Built-in digital RH and temperature sensor & external thermistor. With display.
(Tini QG connector not included, order separately. Specify connector Code 4 when ordering probe)

Common Specification

RF specification: EN300-220
RF power: 10mW
Environment specification  
  Compliant to EN300-220: -10 to +55°C
  Actual: -30 to +65°C
  Humidity: 100% non condensing
Environmental rating: IP40
Dimensions (footprint): 78 x 41mm
Battery endurance: up to 5 years (interval set to 5 minutes) (less for GL-70 and GS40 series)
Transmission interval range: 1 sec to 4 hours
Indicator (red LED): transmit active/on/off
Control switch (concealed): test mode / hibernate
Antenna socket: SMA

Transmitter Specification

Model(s) Sensors Range Resolution Accuracy
GC10/GD10 built-in temperature

built-in RH
-30 to 65°C

0-100%
0.1°C

0.1%
±0.4°C (+5 to +40°C)
±1.0°C (-20 to +80°C)
±2% (10 to 90%RH)
±4% (0 to 100%RH)
GD11

built-in temperature and RH
external thermistor temperature
As GC10
-15 to 40°C
-30 to 65°C

0.1°C
0.2°C

±0.3°C
±0.5°C

Common to all transmitters
Gen II Quick Start Instructions

Specific to this family of transmitters
(None)