banner
Product Library > Accessories

Accessories

      1000
series
RX250
LC68 Computer Lead Connects the Squirrel serial port to the PC serial port
RS232/USB Computer Lead Use in conjunction with an LC68 to connect to the Squirrel to a PC USB port
RS232/2M Extension Lead 2m LC68 lead extender
LC69 Modem Lead Connects the Squirrel serial port to a landline telephony only modem
LC-IS1000 Opto-isolated RS232 Lead Operationally identical to the LC68, however complete galavanic isolation is provided using opto isolators installed in the connector hood
LCDP Squirrel Lead Connect two serial devices to the Squirrel simultaneously
LCTX Transmitter Lead Connects an RX250AL to a Transmitter
LCTX3 Transmitter Lead Connects a PC to a Transmitter
      1000
series
RX250
Moxa Nport 5110 The kit consists of the Nport 5110 serial to ethernet adaptor, S/W and specific cable for allowing TCP/IP or ethernet connectivity. Visit http://www.moxa.com/product/NPort_5110.htm for further details. Nport5110
GSMSQ
GSM Modem kit (logger / receiver side)

The kit consists of the following:

  • Wavecom Xtend modem
  • Mounting tabs
  • Logger to modem lead (type GSM-mdm-com2X)
  • Antenna with 1.8m lead
  • SMA connector
  • User instructions

When installed, access to the Squirrel can be achieved via a GSM network.
Note: GSM connectivity is only available with Darca Plus software.
A sim card from the Network service provider is required.
The kit is necessary for text messaging functionality.

GSMSQ
GSMPC GSM Modem kit (PC side)

The kit consists of the following:

  • Wavecom Xtend modem
  • Antenna
  • Modem to PC serial lead (type LC-PC/MDM)
  • AC to 12V DC power supply (type MPGSMextend)
  • User instructions

GSMPC

MPGSMextend

OSA2 (On Site Alarm) This self powered siren & visual alarm module is for use with Eltek Squirrel dataloggers and the GenII RX250AL receiver logger. The polycarbonate case can be wall mounted (fixing screws included) and contains 4 bright red LEDs flashing at a frequency of approx. 3Hz, combined with a high output piezo alarm. A 9V battery is housed in the case. Interconnecting cable (single pair required) and connector is not included (the connector is supplied with the logger).

Sound output: Approximately 85dB @ 1m
Temp. range: -20°C to +60°C
Dims: L: 122mm, W: 73mm, D: 45mm (max)

siren & visual alarm module
      1000
series
RX250
MP12U Input: 100/240V AC at 50/60Hz
Output: 12V DC 7.2W
Ultra low leakage.
With UK / Euro / Rest of world plug. Please specify plug type when ordering.
MP12U
MP24U Input: 100/240V AC at 50/60Hz
Output: 24V DC 6W
For sensor supply e.g. air velocity.
MP24U

Transmitter

WBG Wall bracket docking kit. (All transmitters, including RP250GD repeater and RC250 receiver have a basic built in wall bracket). This kit enables fitment to difficult or uneven surfaces. The kit provides additional docking security. GenII Wall bracket

Logger

      1000
series
RX250 and WSR
WB0 Stainless steel logger wall bracket kit. The kit securely holds the Squirrel place. The kit is suitable for use with any Squirrel but should preferably be used on a flat surface only. No modification is necessary to the Squirrel case. Squirrel mounted on WB0
WB0 Wall Brackets
WB65 Stainless steel "U" shaped wall bracket allowing access to button panel and LCD. Dimensions (160 x 120 x 65) mm. A version 85mm deep is also available type WB85. WB65 wall bracket
      1000
series
RX250 and WSR
PEL1 A rugged weatherproof and portable resin formed enclosure customised for use with the Squirrel data logger and probes. For Squirrels with case depth 60 and 85 mm.
Enclosure dimensions: H 125mm W 270mm D 245mm.
PEL Weatherproof Box
PEL1A A rugged weatherproof and portable resin formed enclosure customised for use with the Squirrel data logger and probes. For Squirrels with case depth 110 and 135 mm.
Enclosure dimensions: H 175mm W 270mm D 245mm.
WB6 Designed for use with Squirrel Electricity Logger types 1010 and 1020.

The polycarbonate enclosure is installed with customised bracket to accept the Squirrel 1010 or 1020. (Other Squirrel models can be used if required). It is fitted with extra large cable glands that permit temperature and current transducer (type LC1000 - Rogowski coil) to be passed through the gland without need for disconnection of the termination.

The enclosure is supplied with a fitted stainless steel mounting plate and is ideal for temporary or permanent installations.
WB6 Enclosure
      1000
series
RX250
LW-ANT/SMA Light weight UHF dipole supplied with 5m coaxial lead terminated in SMA connector and mounting hardware. Light Weight Antenna